← Retour en tête du site

Blog lemsprod depuis 2009

← Retour aux archives
📅 Publié le 26/12/2010

Render farm Ikea : 186 Gflops !

Un renderfarm linux maison dans un boitier Ikea: monstrueux ! Dessins là et là et fiche technique (suedois). Ah ces vikings ils sont forts !

Pour donner une idée de la puissance de Helmer (~ 186 Gflps): en 2008 sur un MacPro 2 x DualCore Xenon 2.66 Ghz avec 4 GB ram il aurait fallu 552 minutes (9h20) pour rendre 24 images 4k comme celle çi que Helmer a pondu en 64 minutes !!! En 2009 le constructeur a “un peu” mis à jour ce gros bébé:

2009-02-23 Helmer is one year old now. Been working fantastic good, and rendered more the a half million frames. Going to rebuild the network from a normal switched to a direct bus. Now network is througha a normal consumer gigabit swithc that handle about 25 MB/s. Now I’ll use a Gigabyte EX58-UD5 motherboard for the new Intel i7 cpu as the backbone. I insert 3x2 gigabit network cards so all motherboards in helmer get a separate gigabit cable direct to the board. The new drives are 4x1TB enterprise WD in a raid-0 just for speed. Speed rocks. Safety is for wimps :) This all will in theory increase network bandwith from 25MB/s to 750MB/s!!! Now I can do video/large data processing and not just small hard crunshing stuff.

Here is some pic for the last job I did “Time Capsule”
http://dalaro.sfe.se

L'entreprise SFE - Svensk Film Effekt vous fera de belles images fixes, animées et en digital cinéma grace à Helmer.

Et puisqu'on peut toujours rêver voici le même “un poil” plus gros 

coût : $900 000 - dépense énergétique 400 000W - puissance: 4 PFLOPS

Si vous voulez vous lancer dans la fabrication d'un renderfarm jetez un oeil là.

← Retour aux archives